Beschrijving
The transmodulator receives a SAT transponder in DVBS (QPSK) or DVBS2 (QPSK /8PSK) modulation and demodulates it, producing an MPEG-2 transport packet. The MPEG2 transport packet is subsequently modulated in COFDM and converted into the output channel (UHF or VHF, with a 7/8 MHz bandwidth), using an agile up-converter – Total or selective removal of the services present in the received transponder, to avoid them being detected (and memorized) by the receivers (STB) – Editable TS_ID, which makes programme/service detection easier on the receiver (STB), since the channel scan is based on this identifier – LCN (Logical Channel Number) allows the assignment of the services present in the output to an LCN, which makes the ordering of the channels easier on the receivers (STB) – Provides information regarding both the occupation of each specific service and the global output occupation, which allows the optimization of the services being distributed – Can be remotely controlled using CDC (Headend control) – Device monitoring and signal status LEDs – S_ID editable to prevent the receivers (STB) in an installation from retuning when the output-Multiplex’s services are modified – Editable Network_ID, Original Network_ID and Cell_ID allow the control of network identifiers – The encrypted satellite channels are transformed into free DTT services through the CI interface and the appropriate CAM module. Depending on the CAM type used (standard/professional), one or several services may be opened for free reproduction